Ted's Blog

I got my Kill a Watt device today and results are pouring in. It plugs in to the wall and the display shows how many watts are being used while something is plugged in to it. It also tracks kilowatt-hours that have been used since it was plugged in which could help when measuring electricity use by a refrigerator whose compressor only comes on every now and then. I should also note that just plugged in to the wall the device itself reads 3 watts, so I have subtracted 3 watts from all the results I’m showing below.

The first thing I tested was my HDTV receiver, which came in at 15 watts. On or off, it is the same. Then I tested my other home entertainment electronics. The VCR (which I haven’t used in years) measured 2 watts, but the receiver and DVD player didn’t even register when they were off. The VCR is pretty old whereas the DVD and receiver are newer and I think newer devices are better about not being vampires. The Dish satellite receiver uses 25 watts while it is on and only drops down to 19 watts when it has been off for a few minutes.

I figure that Georgia Power charges about 10 cents per kilowatt hour. So something that is on for 24 hours a day for 365 days per year (8,760 hours) costs 87.6 cents per watt. A 100-watt light bulb would cost $87.60 to run all year long. So that HDTV receiver costs me $13.14 per year to run. If I make good use of my remote control surge protector, it can pay for itself in 3 years. That’s not a great payoff, but I’ll take it.

I measured a lamp I have that uses a 23-watt compact fluorescent bulb in it and it came out at 22 watts. The timer I have that lamp plugged in to has a motor that turns the clock, so I have always worried that the timer uses more electricity than the lamp would if I just left it running all the time. But the timer only uses 2 watts, so that is a good deal (plugged in 24 hours a day it uses as much electricity as the light does in 2 hours; not great).

I moved on to the computer. I leave my DSL modem and wi-fi network running all the time. I also leave my Tivoli Model Two speakers on all the time as my computer speakers, even when the computer is off. I also have a charging station that has its own surge protector inside and plugged in to that are chargers for my Palm, iPod, and cell phone. All of that stuff plugs in to a surge protector and when I measured the consumption with the computer turned off, I got 17 watts. That’s not all that bad, I don’t think. Turn the computer and a monitor on and it bumps up to 151 (so the computer and monitor together are 134), but when starting a program like iTunes with the hard drive going full blast and the processor blazing, it bumps up to 184. I have a second monitor I only turn on when I need a bigger desktop and it uses 22 watts. My primary monitor uses 29 watts, but it is a nicer monitor and goes to standby if I’m not there.

My laptop measures about 20 watts when plugged in with a full battery, though it briefly spiked to 37 when I started iTunes. That’s still way less than the desktop. Asleep, after a couple of minutes, it dropped down to 1 watt. That’s pretty minimal. Just the AC adapter without the laptop plugged in, but the green LED lit, it registers 0. Want to save a lot of energy? Don’t use a desktop computer: a desktop uses about 6 times as much energy.

I tested my coffee maker as I made a cup of coffee. Once you flip the switch to start brewing, it spikes up quickly to 610 watts. I knew anything with a heating element would use a lot of watts. It did cut off completely once it was done brewing, though the heater would probably kick in every now and then to keep the coffee in the pot hot. The good thing is even though it uses a lot of watts, it doesn’t use them for long, so the total kilowatt-hours for a cup of coffee is 0.20. That’s only 2 cents, which is a price I’m willing to pay for hot fresh-brewed coffee.

I’ll post more results in a couple of days as I test everything else around the house. After that I won’t really have any use for the Kill a Watt, so I will lend it out if you are interested.

When I bought my TV, it was “HD ready,” meaning it wasn’t. It couldn’t receive over-the-air HD signals without some other device unscrambling the signal first. So I wound up buying a HD receiver that would do that. One thing I noticed was the HD receiver stays pretty warm all the time, so even when it is off (really on standby) it is using a lot of power. If you unplug it, it has to boot up which takes maybe a minute or so. So it is always booted up and ready.

On a bulletin board I visit now, we were talking about energy efficiency and someone mentioned that one of the big energy killers is devices that are turned off but still use up a lot of electricity. These are sometimes called “vampires”. This guy said he had a TV that used a lot even when it was off, which he was able to measure using a Kill A Watt energy monitor. He has an off-grid cabin that uses solar power, so he has to avoid vampires like that and instead chose to use a regular TV in the cabin.

Anyway, what I told him was needed is a remote controlled surge protector. That way you could plug in the DVD player, TV, receiver, HD box, etc. and then turn off the surge protector so they couldn’t use any energy while they were off (essentially unplugged now). You could do this by hand, but it would be easier to do it by remote since surge protectors are usually buried under a lot of wire. Another guy said they already make them, so I went looking on Amazon and sure enough, I found one made by Belkin.

It is pretty neat. It has 2 plugs for continuous power, which are needed for things like a DVR that might record a show while I’m not there. Then it has 6 plugs that can be cut off with a remote. I think it uses radio frequencies and therefore doesn’t need a direct line of sight from the remote to the device, but if not, I will be able to program that into my universal remote. It also has settings so that you could have one surge protector for the home entertainment group and another for the computer set up independently.

I bought one. I will set up my DVR and TV with continuous power since I use those the most. But when I watch a DVD or want to tune in an HD program (not that often, partly because I don’t even get decent reception of most of the stations), I will turn on the other stuff. While I was at it, I also bought a Kill A Watt device so I can measure how much energy I am saving. Hopefully this will save energy. Once I measure a few things with the Kill a Watt, I won’t need it very often, so anyone is welcome to borrow it.

I knew it had been a while since I had been to Six Flags and I wanted to get back there soon. Lately, their finances have been shaky and it wasn’t completely certain they would even be able to stay open this year. Jeb mentioned possibly planning a trip and after the cold rainy weather of last weekend, we decided to try this weekend (next weekend is the last one of the year). I asked Grant, but he couldn’t go.

We started the day by going to church at Holy Cross, which I thought would be good because it would make us start early (mass ending at 10), but after stopping at Mom’s to change out of church clothes and picking up coffee and lunch, then driving down to the park we got there a little after 11:30 (park opens at 10:30). Then I lost the tickets I had purchased and printed out at home the night before. We walked to the gate (parking was self-serve and there was only one tram which doesn’t seem to run that often) and a lady at customer service was able to re-print our tickets by using my credit card. The deal with buying at home was that you get kid’s price of $30 instead of paying $45. But if you paid $50 you would get a season pass for next year plus get in free the rest of this year.

Continue reading “Six Flags”

This weekend my one-year license for Trend Micro Internet Security Pro 2009 expired. Really, it shouldn’t be because I had Trend Micro Internet Security 2008 last year which didn’t expire until late November, but when I got 2009 last October, I thought I could go ahead and install it and keep the same expiration date. But because the Pro version is different than the regular version, there was no such deal and it was like throwing away six weeks of my purchase (free after rebates).

Knowing the expiration was coming up (it won’t let you forget), I have been keeping an eye on Fry’s ads to see when the new version would come out and if I could get it for free after rebate again. So far only the regular version seems to be out and it is $5 after rebates. I think I can do better. But what to do in the meantime? I knew Trend would stop downloading the latest virus definitions and software updates, but I didn’t realize it wouldn’t even scan my hard drive anymore. So I felt like I needed a stopgap and figured I would try some free software.

Continue reading “Antivirus Software”